特點
No External Components Required
Maximum Offset Voltage:
10μV
Maximum Offset Voltage Drift:
50nV/°C
Supply Current: 80μA
Minimum CMRR: 110dB
Minimum PSRR 110dB
Single Supply Operation 4.75V to 16V
Common Mode Range Includes GND
Output Swings to GND
Typical Overload Recovery Time 70ms
Pin Compatible with Industry Standard Dual Op Amps
典型應(yīng)用
典型應(yīng)用
描述
The LTC?1047 is a micropower, high performance dual zero-drift operational amplifier. The sample-and-hold capacitors usually required by other chopper amplifiers are integrated on-chip, minimizing the need for external components.
The LTC1047 has a typical offset voltage of 3μV, drift of 10nV/°C, input noise voltage typically 3.5μV P-P , and typical voltage gain of 150dB. The common mode rejection is 110dB minimum, with minimum power supply rejection of 105dB. The LTC1047 also offers a 0.2V/μs slew rate and a gain bandwidth product of 200kHz. Overload recovery time from saturation is 70ms, four times faster than chopper amplifiers with external capacitors.
The LTC1047 is available in a standard plastic 8-pin PDIP as well as a 16-pin SW package. The LTC1047 is a plug-in replacement for most dual op amps with improved DC performance and substantial power savings.